Home Bags Backpacks Compression Fitting Removal Tool – The 16 best products compared

Compression Fitting Removal Tool – The 16 best products compared

Recommended products regarding the topic “Compression Fitting Removal Tool”

We have compared products in the section “Compression Fitting Removal Tool”. Here you can find the top 16 in the category “Compression Fitting Removal Tool”.

Compression Fitting Removal Tool – the most important at a glance

Compression fitting removal tools are essential for any DIY project involving plumbing or gas lines. These tools are designed to remove compression fittings easily without damaging the pipes. There are several types of compression fitting removal tools available on the market, including plier-style tools, wrench-style tools, and slide-hammer tools. Plier-style tools are the most common and offer easy one-handed operation, while wrench-style tools provide more leverage for stubborn fittings. Slide-hammer tools are best for removing fittings in tight spaces. When choosing a compression fitting removal tool, make sure it is made of durable materials such as steel or aluminum and has a comfortable grip for easy use. Overall, compression fitting removal tools are a must-have for any DIY enthusiast or professional plumber. No matter what type of tool you choose, it will save you time and frustration when removing compression fittings.

Bestsellers in “Compression Fitting Removal Tool”

A list of bestsellers under the category “Compression Fitting Removal Tool” you can find here. Here you can see which products other users have bought especially often.

Bestseller No. 1
Compression Sleeve Puller - Remove Nut & Ferrule of Pipe 03943 - Sleeve Remover for 1/2-Inch Compression Fittings Only - Plumbing Tools Compression Ring Removal Tool - Corroded & Frozen Supply Stops
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes.
  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe.
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant.
  • 100% QUALITY GUARANTEE – ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours.
SaleBestseller No. 2
Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool
  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool.
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple.
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
Bestseller No. 3
Olive Puller Not Damage The Pipe Olive Remover Ferrule Puller Corrosion-Resistant Compression Ring Removal Tool Suitable for Brass Pipes with Diameters of NPT 1/2" & NPT 3/4" Ferrule Removal Tool
  • 【Olive Puller That Will Not Damage The Pipe】This DUOYI olive puller is an ideal tool for taking out olives.Without damaging the pipe,puller utilises the compression fitting locking nut to remove the olives which used or damaged from the copper piping.
  • 【Suitable For Brass Pipes With Diameters Of NPT 1/2 Inch & NPT 3/4 Inches】The olive puller can work on air-conditioning pipes,and is suitable for brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches.
  • 【Abrasion-Resistant & Corrosion-Resistant Solid Brass】The DUOYI ferrule puller is made of high-quality solid brass,which not only has high strength and high hardness,but also has good wear and corrosion resistance. In addition,the olive puller has a smooth surface High,with high-grade texture,and long service life,can provide you with long-term service.
  • 【Easy To Use】Olive ring removal tool is easy to operate,and you can work without reading the manual or with the help of other tools,reducing work time and energy.
  • 【Suitable for various tasks】Compression ring removal tool is suitable for various tasks.It can increase torque and remove olives more easily.It provides a quick and reliable remedy for removing most olives.
SaleBestseller No. 4
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool.
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple.
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant.
  • 【2 Ways To Remove】Remove the old compression fitting or the old angle stop.WAY 1: ONLY REMOVE THE FERRULE---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). WAY 2: BOTH REMOVE THE COMPRESSION NUT AND FERRULE---Place red notched end of tool behind compression nut. And then both way1 or way2 all need to: Engage the silver head end in tubing. Hold tool firmly while turning the t-bar handle, the puller tool will automatically pull compression nut and ferrule.
  • 【Gteat Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
Bestseller No. 5
Superior Tool Company 03943 Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only
  • Easily removes compression sleeves
  • Won’t damage walls
  • Ideal for working on frozen or corroded supply stops
Bestseller No. 6
Compatible with Compression Sleeve Puller(03943)- Sleeve Remover for 1/2-Inch Compression Fittings Only - Corroded & Frozen Supply Stops -Plumbing Tools Compression Ring Removal Tool
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes.
  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe.
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant.
  • 100% QUALITY GUARANTEE – ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours.
Bestseller No. 7
JEUCLEL US Standard Olive Remover Puller Tool for 1/2-inch / 3/4-inch Dia Solid Brass Pipe Fitting, Olive Removal Tool for Copper Pipe, Compression Sleeve Puller
  • 【Ideal Tool】 This olive puller is the ideal tool for removing olives from pipes. It utilizes a compression fitting to lock the nut, thereby removing damaged or used olives from the pipe without damaging the pipe.
  • 【Applicable Specifications】 The olive puller can be applied to brass or copper pipes with diameters of 1/2 inches and 3/4 inches.
  • 【Premium Material】 The olive puller is made of solid brass. It has the advantages of high strength and high hardness. It has strong wear resistance and corrosion resistance, and has a long service life.
  • 【Easy to Use】 This olive removal tool is very simple to operate, no need to read complicated instructions, it can be used easily. Save a lot of time and effort.
  • 【Wide Applications】 Olive removal tools are capable of various tasks. It is applied to the work of dismantling olives in various scenarios. It is an indispensable cost-effective tool.
Bestseller No. 8
QWORK Olive Puller, Compression Ring Removal Tool Suitable for Brass Pipes, Olive Puller Removal Tool, Brass Copper Pipe Fitting
  • Solid Brass Tool: The copper pipe fittings are made of high-quality solid brass, which not only has high strength and high hardness, but also has good wear resistance and corrosion resistance, smooth surface, long-term service.
  • Suitable for: The olive puller can work on air conditioner pipes, suitable for 1/2" and 3/4" diameter brass pipes.
  • Key Features: It removes used or damaged olives from copper tubing using a compression fitting locknut without damaging the tubing, perfect tool for pulling out olives.
  • Easy to Use: The olive remover tool can remove most of the olives and can also increase the torque, suitable for various tasks.
  • Satisfaction Guaranteed: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month.
Bestseller No. 9
Compression Sleeve Puller Tool For Ferrule Puller For 1/2” Copper Water Compression Sleeve, 1/2-Inch Copper Tubing, Remove Ferrule & Nut Of Pipe, Plumbing Tools Compression Ring Removal Tool(4461)
  • [HIGH QUALITY MATERIAL] Made of high-quality materials with a durable and long-lasting construction, the ferrule puller can stand the test of time
  • [SAVE YOU TIME] The collar puller is specially designed to remove the leaking compression casing without damaging the pipe wall and easily pull the nuts and hoops off the pipe. Saves a lot of time cutting old pipes. Buying this tool simplifies the process and saves you time and effort
  • [CORROSION AND FREEZING CONDITIONS] Even if the existing valve is severely corroded or frozen, you can turn the lever to remove the old compression casing from the pipe. Compression sleeve pullers can effortlessly handle frozen or corroded supply stops. The tool is designed for 1/2 inch rotary valves on dishwashers, sinks and toilets with compression fittings
  • [TWO INSTALLATION METHODS] Method 1: Only remove the clamp - clamp the clamp between the red notch end of the tool (notch clamp clamp). Method 2: Remove Compression Nut and Collar - Place the red notched end of the tool behind the compression nut. Make sure the ferrule puller is properly aligned with the pipe, then you can rotate the nut and ferrule with the handle
  • [BUY WITH CONFIDENCE] We provide lifelong after-sales service for customers, if you have any problems with our compression sleeve puller tool, please feel free to inform us, we will do our best to solve your problem within 24 hours, so that you are 100% satisfied
SaleBestseller No. 10
Compression Sleeve Puller and Sleeve Remover for 1/2 Inch Compression Fittings Only,Remove Nut & Ferrule of Pipe 03943 Plumbing Tools Compression Ring Removal Tool - Corroded & Frozen Supply Stops
  • ★No Damage To Walls & Copper & Supply Lines:This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve.
  • ★Work On Corroded & Frozen Supply Stops:This ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.
  • ★Saves A Lot Of Time:-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes.
  • ★How to use:1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
  • ★Buy with Confident: If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool . Buy with confidence . We provide 100% customer support 1-year product warranty.

Our Winner:

Winner in comparison
Compression Sleeve Puller - Remove Nut & Ferrule of Pipe 03943 - Sleeve Remover for 1/2-Inch Compression Fittings Only - Plumbing Tools Compression Ring Removal Tool - Corroded & Frozen Supply Stops
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes.
  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe.
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant.
  • 100% QUALITY GUARANTEE – ONE YEAR MONEY BACK. Buy with confidence and add to cart now! We provide 100% customer support 1-year product warranty. Have any problem, please email us, we'll reply within 12 hours.

Current offers for “Compression Fitting Removal Tool”

You want to buy the best products in “Compression Fitting Removal Tool”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Compression Fitting Removal Tool”.

SaleBestseller No. 2
LASCO 13-2706 Compression Sleeve Puller Tool 4661, 1, SS
LASCO 13-2706 Compression Sleeve Puller Tool 4661, 1, SS
The Compression Sleeve Puller Effortlessly Pulls The Nut And Ferral Off Of The Pipe; Removes 1/2-Inch Copper Water Compression Sleeve
$33.05
SaleBestseller No. 3